vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 1 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fast soft recovery rectifier diode, 60 a features ? designed and qualified according to jedec-jesd47 ? compliant to rohs directive 2002/95/ec applications ? output rectification and freewheeling in inverters, choppers and converters ? input rectifications wher e severe restrictions on conducted emi sh ould be met description the vs-60epf..pbf and vs-60cpf..pbf fast soft recovery rectifier series has been optimized for combined short reverse recovery time an d low forward voltage drop. the glass passivation ensures stable reliable operation in the most severe te mperature and power cycling conditions. product summary package to-247ac modified (2 pins), to-247ac i f(av) 60 a v r 1000 v, 1200 v v f at i f 1.4 v i fsm 700 a t rr 95 ns t j max. 150 c diode variation single die snap factor 0.6 to-247ac modified to-247ac vs-60cpf.. vs-60epf.. 2 1 3 cathode anode 2, 4 anode 1 anode 3 base common cathode base common cathode major ratings and characteristics symbol characteristics values units v rrm 1000 to 1200 v i f(av) sinusoidal waveform 60 a i fsm 700 t rr 1 a, - 100 a/s 95 ns v f 30 a, t j = 25 c 1.2 v t j range - 40 to 150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-60EPF10PBF, vs-60cpf10pbf 1000 1100 8 vs-60epf12pbf, vs-60cpf12pbf 1200 1300 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 103 c, 180 conducti on half sine wave 60 a maximum peak one cycle non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 700 10 ms sine pulse, no voltage reapplied 830 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 2450 a 2 s 10 ms sine pulse, no voltage reapplied 3460 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 34 600 a 2 ? s
vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 2 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 60 a, t j = 25 c 1.4 v forward slope resistance r t t j = 125 c 4.6 m ? threshold voltage v f(to) 0.9 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 8 recovery characteristics parameter symbol test conditions values units reverse recovery time t rr i f at 60 apk 25 a/s 25 c 480 ns reverse recovery current i rr 8a reverse recovery charge q rr 2.7 c snap factor s 0.6 i fm t rr dir dt i rm(rec) q rr t thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 40 to 150 c maximum thermal resistance, junction to case r thjc dc operation 0.4 c/w maximum thermal resistance, junction to ambient r thja 40 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (ibf in) maximum 12 (10) marking device case style to-247ac mo dified 60epf10, 60epf12 case style to-247ac 60cpf10, 60cpf12
vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 3 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 0 30 maximum allowable case temperature (c) average forward current (a) 20 10 40 50 60 70 90 100 110 120 130 140 150 60.pf.. series r thjc (dc) = 0.4 c/w conduction angle 60 30 90 180 120 ? 0 maximum allowable case temperature (c) average forward current (a) 20 40 60 80 100 dc 90 100 110 120 130 140 150 60.pf.. series r thjc (dc) = 0.4 c/w ? conduction period 30 60 90 120 180 maximum average forward power loss (w) average forward current (a) 0 10 20 30 40 50 60 70 80 90 100 rms limit 180 120 90 60 30 conduction angle 60.pf.. series t j = 150 c 0 30 20 10 40 50 60 70 ? maximum average forward power loss (w) average forward current (a) 0 20 40 60 80 100 0 20 40 60 80 100 120 140 rms limit ? conduction period 60.pf.. series t j = 150 c dc 180 120 90 60 30 1 10 100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 300 400 500 600 700 800 60.pf.. series initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s at any rated load condition and with rated v rrm applied following surge. 0.01 0.1 1 peak half sine wave forward current (a) pulse train duration (s) 300 400 500 600 700 800 900 60.pf.. series initial t j = 150 c no voltage reapplied rated v rrm reapplied maximum non-repetitive surge current versus pulse train duration.
vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 4 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - recovery time characteristics, t j = 25 c fig. 9 - recovery time characteristics, t j = 150 c fig. 10 - recovery charge characteristics, t j = 25 c fig. 11 - recovery charge characteristics, t j = 150 c 1000 10 100 1 0.5 0 1.0 1.5 2.0 2.5 3.0 instantaneous forward current (a) instantaneous forward voltage (v) t j = 25 c t j = 150 c 60.pf.. series 0 40 80 120 160 200 t rr - maximum reverse recovery time (ns) di/dt - rate of fall of forward current (a/s) 0 100 200 300 400 500 600 60.pf.. series t j = 25 c i fm = 60 a i fm = 10 a i fm = 1 a i fm = 30 a i fm = 5 a 0 40 80 120 160 200 t rr - maximum reverse recovery time (ns) di/dt - rate of fall of forward current (a/s) 0 200 400 600 800 1000 1200 60.pf.. series t j = 150 c i fm = 60 a i fm = 10 a i fm = 1 a i fm = 30 a i fm = 5 a 0 40 80 120 160 200 q rr - maximum reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 0 2000 4000 6000 8000 10 000 12 000 60.pf.. series t j = 25 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 0 40 80 120 160 200 q rr - maximum reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 0 5000 10 000 15 000 20 000 25 000 60.pf.. series t j = 150 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a
vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 5 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 12 - recovery current characteristics, t j = 25 c fig. 13 - recovery current characteristics, t j = 150 c fig. 14 - thermal impedance z thjc characteristics 0 40 80 120 160 200 i rr - maximum reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 0 5 10 15 20 25 30 35 40 45 60.pf.. series t j = 25 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 0 40 80 120 160 200 i rr - maximum reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 0 10 20 30 40 50 60 60.pf.. series t j = 150 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 10 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 0.001 0.01 0.1 1 d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 steady state value (dc operation) 60.pf.. series single pulse
vs-60epf1.pbf, vs-60cpf1.pbf series www.vishay.com vishay semiconductors revision: 18-aug-11 6 document number: 94105 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table 2 - current rating (60 = 60 a) 3 - circuit configuration: e = single diode, 2 pins c = single diode, 3 pins 4 - package: p = to-247ac/ac modified 5 - type of silicon: f = fast recovery 6 - voltage code x 100 = v rrm 7 - pbf = lead (pb)-free 10 = 1000 v 12 = 1200 v device code 6 2 4 3 5 7 60 e p f 12 pbf 1 - vishay semiconductors product vs- 1 links to related documents dimensions to-247ac modified www.vishay.com/doc?95253 to-247ac www.vishay.com/doc?95223 part marking information to-247ac modified www.vishay.com/doc?95255 to-247ac www.vishay.com/doc?95226
outline dimensions www.vishay.com vishay semiconductors revision: 16-jun-11 1 document number: 95223 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and inches notes (1) dimensioning and tolera ncing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish uncontrolled in l1 (6) ? p to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jede c outline to-247 with ex ception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 fk 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.37 0.065 0.094 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.86 0.015 0.034 ? p1 - 6.98 - 0.275 c1 0.38 0.76 0.015 0.030 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 1.78 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) ? p (datum b) fp1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) planting lead assignments diodes 1. - anode/open 2. - cathode 3. - anode
outline dimensions www.vishay.com vishay semiconductors revision: 21-jun-11 1 document number: 95253 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and inches notes (1) dimensioning and tolera nce per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish uncontrolled in l1 (6) ? p to have a maximum draft an gle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jede c outline to-247 with ex ception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 ? k 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.37 0.065 0.094 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.86 0.015 0.034 ? p1 - 6.98 - 0.275 c1 0.38 0.76 0.015 0.030 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 1.78 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c a (6) p (datum b) p1 d1 (4) 4 e1 view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) planting lead assignments diodes 1. - anode/open 2. - cathode 3. - anode 0.10 a c m m ? k b d m m
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
